Best In Bass Guitars .Com

Largest Data base of bass guitars online


Month: December 2019

Wilkinson Jazz Electric Bass VJ74PL Classic 60’s

Vintage Jazz Electric Bass VJ74PL Purple Classic 60’s Wilkinson RI

NEW bass hand picked at the factory in Ft. Worth Tx.


Body: Alder
Neck: Hard Maple – Bolt On
Scale: 34″/864mm
Frets: 20
Neck Inlays: Pearloid Dot
Tuners: Wilkinson® WJBL200
Bridge: Adjustable
Pickups: 2 Wilkinson® (N) WOJBn (B) WOJBb
Hardware: Chrome
Controls: 2 Volume/ 1 Tone


Vintage Jazz 5 string Electric Bass VJ75MBK Wilkinson


new and unplayed.


With its gorgeous 5-string maple neck and fingerboard with chunky black block inlays the VJ75M also features Wilkinson hardware, including two full-toned, crisp and clear bass pickups, that give the player wonderful tonal variations and awesome playability.


• Body: Alder • Neck: Hard Maple – Bolt On
• Fingerboard: Maple
• Scale: 34″/864mm

• Frets: 20
• Neck Inlays: Black Block
• Tuners: Wilkinson® WJBL175 • Bridge: Adjustable

• Pickups: 2 Wilkinson® WOJB5F /WOJB5R
• Hardware: Chrome
• Controls: 2 Volume/ 1 Tone

Peavey Grind 4-string Bass Guitar

Peavey Grind 4-string Bass Guitar


Neck-through-body design; mahogany body wings with maple stringers

Mahogany neck with an Indonesian rosewood fingerboard

35 inch scale; 24 frets

Passive humbucking pickups

19:1 ratio tuning machines

Dual action torsion rod

Ppeaveygrindbass1peaveygrindbass4 peaveygrindbass5



Factory P/J replaced with EMG Geezer Butler passive P/J set ($110)
All copper foil shielding throughout
D’Addario’ Chromes installed
Alder body
Bolt on maple neck
Rosewood fretboard.
Mist Green
34” scale
All setup just how you’d want it,

American made Kramer Bass Guitar

 a vintage American made Kramer DMZ 4001 from the late 70’s. Converted long ago to the double P configuration this bass has twice the punch 1

Maple body and inlays in the Aluminum neck. Some flame Maple on the upper half that pics don’t do justice to. Good balance and not too heavy at just over 9 1/2lbs. Comes with original hardshell case in excellent condition with all hardware and handle working fine.

Fender Hot rod 70’s Jazz Bass Guitar



Fender Vintage

70’s Jazz Bass Custom



This is a custom built all American Fender Jazz bass. A 2014 American Fender Vintage 70’s Hotrod Jazz body with American Fender pickups including a 60’s Fender Custom Shop jazz pickup.customjazzneck


A new Audere JZ3 pro onboard drop-in preamp gives this bass plenty of power and tonal variety. If not already familiar with these drop in preamps you can Google it to get all the info. Being a PJ configuration you can actually turn down the jazz pickup and have a P bass tone.head jb custom



The neck is a 2005 Fender American Pro jazz neck and fits perfectly. It has the original tuners and is straight with working truss rod and minimal fret wear. The bridge is a new













Structurally this bass is in excellent condition and has only minor cosmetic player wear.

Hipshot kickass bridge which looks similar to the original Fender hi mass bridg


Good balance and an average weight of 9 1/2 lbs. They no longer produce these Hotrod Jazz basses and don’t come up for sale used often. When they do they’re between 1500 – 2200. If you prefer passive I can change it back to its original control plate. Comes with the Fender chainsaw style hardshell case shown and a tort pickguard.

Spector Euro Rebop Bass Guitar


Spector Euro Rebop

Made in mid 2000’s in the Spector Euro factory in Czech Republic


This is a tone monster and you will not get lost in the mix with this bass.

 this one is a bolt on Rebop with the deep set 5 bolt neck pocket. Not as expensive as the neck through but lighter.


This one is just under 8 lbs. All original with the Tonepump OBP and structurally in excellent condition. Straight neck, truss rod works, frets show almost no wear.


Cosmetically it does have its share of minor blemishes but as you can’t see in the photos you have to be up close to see. Feels and sounds great with good action.